• Gibson Les Paul Standard Wine Red 1995 Electric Guitars / Solid Body
  • Gibson Les Paul Standard Wine Red 1995 Electric Guitars / Solid Body
  • Gibson Les Paul Standard Wine Red 1995 Electric Guitars / Solid Body
  • Gibson Les Paul Standard Wine Red 1995 Electric Guitars / Solid Body
  • Gibson Les Paul Standard Wine Red 1995 Electric Guitars / Solid Body
  • Gibson Les Paul Standard Wine Red 1995 Electric Guitars / Solid Body
  • Gibson Les Paul Standard Wine Red 1995 Electric Guitars / Solid Body
  • Gibson Les Paul Standard Wine Red 1995 Electric Guitars / Solid Body
  • Gibson Les Paul Standard Wine Red 1995 Electric Guitars / Solid Body
  • Gibson Les Paul Standard Wine Red 1995 Electric Guitars / Solid Body
  • Gibson Les Paul Standard Wine Red 1995 Electric Guitars / Solid Body
1 11
  • Used
Gibson

Gibson Les Paul Standard Wine Red 1995

Gibson Les Paul Standard Wine Red 1995

Serial Number: 92365363

Description
The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please visit our Lincoln Avenue showroom or call to speak to one of our Used and Vintage experts.
Finish Details: Original, with a few finish touchups
Body Material: Mahogany
Body Details: Solid mahogany body with two piece carved maple cap. There are a couple small finish touchups, one on the treble horn and one on the back of the bass bout.
Neck Material: Mahogany
Fingerboard Material: Rosewood
Neck Profile: "C" profile
Neck Thickness (IN): .82" (1st fret), .97" (12th fret)
Fingerboard Radius: 12.00"
Nut Width: 1-11/16"
Scale Length: 24 3/4"
Neck Details: Set mahogany neck with bound rosewood fretboard and trapezoid inlays.
Electronics: Original Gibson pickups and controls, with 3-way toggle switch and volume/tone controls for each pickup. There has been a ground wire added to the treble tuneomatic bridge post to ground the strings with the Bigsby installed.
Pickup Measurements: 7.8k (neck), 13.6k (bridge)
Hardware: An aftermarket Bigsby B7 has been installed; the original stop tailpiece and posts are included in the case.
Modifications/Repairs: An aftermarket Bigsby has been installed, with two screw holes on the front of the guitar. To ground the strings with the Bigsby installed, a ground wire has been run from the treble side bridge post. The original stop tailpiece and posts are included, and the mounting holes are left open if a stopbar configuration is preferred.
Case Details: Original hardshell case
Cosmetic Condition: The guitar shows moderate wear, with some light finish scratches and scuffs throughout. The body has a few small chips/dents throughout, mostly on the back; a couple of these have been touched up. There is also a small finish chip underneath the treble side bridge post. The pickguard is cracked at the upper mounting screw, however it is held securely.
Serial Number: 92365363
Tech Notes: Currently set up with 10s, low action, and optimal neck relief. The frets show some light wear, mostly in the first position, but the guitar sets up and plays well.
View full details

SKU: U2942635801

Description
The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please visit our Lincoln Avenue showroom or call to speak to one of our Used and Vintage experts.
Finish Details: Original, with a few finish touchups
Body Material: Mahogany
Body Details: Solid mahogany body with two piece carved maple cap. There are a couple small finish touchups, one on the treble horn and one on the back of the bass bout.
Neck Material: Mahogany
Fingerboard Material: Rosewood
Neck Profile: "C" profile
Neck Thickness (IN): .82" (1st fret), .97" (12th fret)
Fingerboard Radius: 12.00"
Nut Width: 1-11/16"
Scale Length: 24 3/4"
Neck Details: Set mahogany neck with bound rosewood fretboard and trapezoid inlays.
Electronics: Original Gibson pickups and controls, with 3-way toggle switch and volume/tone controls for each pickup. There has been a ground wire added to the treble tuneomatic bridge post to ground the strings with the Bigsby installed.
Pickup Measurements: 7.8k (neck), 13.6k (bridge)
Hardware: An aftermarket Bigsby B7 has been installed; the original stop tailpiece and posts are included in the case.
Modifications/Repairs: An aftermarket Bigsby has been installed, with two screw holes on the front of the guitar. To ground the strings with the Bigsby installed, a ground wire has been run from the treble side bridge post. The original stop tailpiece and posts are included, and the mounting holes are left open if a stopbar configuration is preferred.
Case Details: Original hardshell case
Cosmetic Condition: The guitar shows moderate wear, with some light finish scratches and scuffs throughout. The body has a few small chips/dents throughout, mostly on the back; a couple of these have been touched up. There is also a small finish chip underneath the treble side bridge post. The pickguard is cracked at the upper mounting screw, however it is held securely.
Serial Number: 92365363
Tech Notes: Currently set up with 10s, low action, and optimal neck relief. The frets show some light wear, mostly in the first position, but the guitar sets up and plays well.