Skip to product information
1 of 11
  • Vintage

Gibson ES-330 Sunburst 1963

Gibson ES-330 Sunburst 1963

Serial Number: 108961

Weight: 6lbs 3oz

Description

The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please visit our Lincoln Avenue showroom or call to speak to one of our Used and Vintage experts.
Finish Details: Original finish.
Body Material: Laminate
Body Details: Laminated maple back, sides, and top. The bridge posts have been drilled out, re-doweled, and re-drilled; the bridge has then been moved slightly back for intonation.
Neck Material: Mahogany
Fingerboard Material: Brazilian Rosewood
Neck Profile: D
Neck Thickness (IN): 1st fret .802", 9th fret .917"
Fingerboard Radius: 12.00"
Nut Width: 1-5/8"
Scale Length: 24 3/4"
Neck Details: Set Honduran mahogany neck with bound Brazilian rosewood fingerboard and small block inlays. The neck has been refretted and the original nut has been shimmed. The fingerboard was planed during the refret process. The tuner post holes have been modified to fit modern 10mm bushing tuners. There are extra holes in the back of the headstock from previously installed tuners.
Electronics: Original pickups and electronics; three-position selector switch with volume and tone controls for each pickup. The solder joints are untouched and the pot codes date to 1963.
Pickup Measurements: Neck 7.99K, Bridge 8.77K
Hardware: The tuner bushings have been replaced with 10mm conversion bushings and the old tuners have been reinstalled. All hardware is original except the bushings.
Weight: 6lbs 3oz
Modifications/Repairs: The neck has been refretted and the original nut has been shimmed. The fingerboard was planed during the refret process. The tuner post holes have been modified to fit modern 10mm bushing tuners. There are extra holes in the back of the headstock from previously installed tuners. The tuner bushings have been replaced with 10mm conversion bushings. The bridge posts have been drilled out, re-doweled, and re-drilled; the bridge has then been moved slightly back for intonation.
Case Details: Hardshell Case (70's Gibson case)
Cosmetic Condition: This vintage guitar is in good condition with wear consistent with its age. The finish is glossy, hazy, and weather checked. There are scratches and areas of wear throughout. The hardware has a present patina.
Serial Number: 108961
Tech Notes: The guitar plays well with low action. The frets are wide and tall, with minimal wear. The serial number dates to 1963 and 1967, as the Gibson serial number system has a duplicate serial number range for these years. The pot codes date to 1963.
View full details

SKU: U5603823702

Description

The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please visit our Lincoln Avenue showroom or call to speak to one of our Used and Vintage experts.
Finish Details: Original finish.
Body Material: Laminate
Body Details: Laminated maple back, sides, and top. The bridge posts have been drilled out, re-doweled, and re-drilled; the bridge has then been moved slightly back for intonation.
Neck Material: Mahogany
Fingerboard Material: Brazilian Rosewood
Neck Profile: D
Neck Thickness (IN): 1st fret .802", 9th fret .917"
Fingerboard Radius: 12.00"
Nut Width: 1-5/8"
Scale Length: 24 3/4"
Neck Details: Set Honduran mahogany neck with bound Brazilian rosewood fingerboard and small block inlays. The neck has been refretted and the original nut has been shimmed. The fingerboard was planed during the refret process. The tuner post holes have been modified to fit modern 10mm bushing tuners. There are extra holes in the back of the headstock from previously installed tuners.
Electronics: Original pickups and electronics; three-position selector switch with volume and tone controls for each pickup. The solder joints are untouched and the pot codes date to 1963.
Pickup Measurements: Neck 7.99K, Bridge 8.77K
Hardware: The tuner bushings have been replaced with 10mm conversion bushings and the old tuners have been reinstalled. All hardware is original except the bushings.
Weight: 6lbs 3oz
Modifications/Repairs: The neck has been refretted and the original nut has been shimmed. The fingerboard was planed during the refret process. The tuner post holes have been modified to fit modern 10mm bushing tuners. There are extra holes in the back of the headstock from previously installed tuners. The tuner bushings have been replaced with 10mm conversion bushings. The bridge posts have been drilled out, re-doweled, and re-drilled; the bridge has then been moved slightly back for intonation.
Case Details: Hardshell Case (70's Gibson case)
Cosmetic Condition: This vintage guitar is in good condition with wear consistent with its age. The finish is glossy, hazy, and weather checked. There are scratches and areas of wear throughout. The hardware has a present patina.
Serial Number: 108961
Tech Notes: The guitar plays well with low action. The frets are wide and tall, with minimal wear. The serial number dates to 1963 and 1967, as the Gibson serial number system has a duplicate serial number range for these years. The pot codes date to 1963.