Skip to product information
1 of 12
  • Vintage

Univox Ripper Black 1970s

Univox Ripper Black 1970s

Serial Number: 014138

Weight: 8lbs 3oz

Description

The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please visit our Lincoln Avenue showroom or call to speak to one of our Used and Vintage experts.
Finish Details: Original finish
Body Material: Alder
Body Details: Solid alder body
Neck Material: Maple
Fingerboard Material: Maple
Neck Profile: C
Neck Thickness (IN): 1st: 0.94 12th: 0.96
Fingerboard Radius: 10.00"
Nut Width: 1-5/8"
Scale Length: 25 1/2"
Neck Details: Bolt on maple neck with an unbound maple fretboard with black dot inlays.
Electronics: Electronics are original excluding the bridge pickup, volume pot, pickup selector, and output jack. There are three humbucker pickups, master volume control, neck tone control, middle tone control, and a three position pickup selector switch.
Pickup Measurements: Neck: 7.38kΩ Middle: 7.45kΩ Bridge: 12.78kΩ
Hardware: Original hardware
Weight: 8lbs 3oz
Modifications/Repairs: -Volume pot has been replaced. -Bridge pickup replaced. -Output jack replaced. -Pickup selector switch replaced. -Solder joints have been touched up.
Case Details: Original Hardshell Case
Cosmetic Condition: The finish is heavoly worn with multiple cracks and scratches. These give a very nice road worn look to the guitar. There is slight seperation between the skunk stripe and the maple wood on the back of the neck. This does not effect the playability or structural support of the guitar. There is a large crack on the top of the guitar from the back of the bridge to strap button.
Serial Number: 014138
Tech Notes: This guitar plays well with low action when setup with optimal neck relief. The frets are low and wide with minimal string divots.
View full details

SKU: U4489105602

Description

The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please visit our Lincoln Avenue showroom or call to speak to one of our Used and Vintage experts.
Finish Details: Original finish
Body Material: Alder
Body Details: Solid alder body
Neck Material: Maple
Fingerboard Material: Maple
Neck Profile: C
Neck Thickness (IN): 1st: 0.94 12th: 0.96
Fingerboard Radius: 10.00"
Nut Width: 1-5/8"
Scale Length: 25 1/2"
Neck Details: Bolt on maple neck with an unbound maple fretboard with black dot inlays.
Electronics: Electronics are original excluding the bridge pickup, volume pot, pickup selector, and output jack. There are three humbucker pickups, master volume control, neck tone control, middle tone control, and a three position pickup selector switch.
Pickup Measurements: Neck: 7.38kΩ Middle: 7.45kΩ Bridge: 12.78kΩ
Hardware: Original hardware
Weight: 8lbs 3oz
Modifications/Repairs: -Volume pot has been replaced. -Bridge pickup replaced. -Output jack replaced. -Pickup selector switch replaced. -Solder joints have been touched up.
Case Details: Original Hardshell Case
Cosmetic Condition: The finish is heavoly worn with multiple cracks and scratches. These give a very nice road worn look to the guitar. There is slight seperation between the skunk stripe and the maple wood on the back of the neck. This does not effect the playability or structural support of the guitar. There is a large crack on the top of the guitar from the back of the bridge to strap button.
Serial Number: 014138
Tech Notes: This guitar plays well with low action when setup with optimal neck relief. The frets are low and wide with minimal string divots.