Description
Description
Summary
Finish: Original
Top Material: Maple Top
Body Material: Maple Body
Body Details: Semi-hollow body, with laminated maple back and sides and maple top
Neck Material: Mahogany Neck
Fingerboard Material: Rosewood Fingerboard
Neck Profile: "C" profile
Neck Thickness (IN): .85" (1st fret), .93" (12th fret)
Fingerboard Radius: 12.00"
Nut Width: 1-11/16"
Scale Length: 24-3/4"
Neck Details: Set mahogany neck with bound rosewood fretboard and dot inlays
Electronics: The selector switch has been replaced, otherwise original. Seymour Duncan Seth Lover pickups, 3-way toggle switch, and volume/tone controls for each pickup.
Pickup Measurements: 7.2k (neck), 8.0k (bridge)
Hardware: Original
Weight: 7 lbs 7.2 oz
Modifications / Repairs: The pickup selector switch has been replaced.
Case Details: Original hardshell case
Cosmetic Condition: There are three long finish cracks on the back of the body, which go roughly the whole length of the body. These are cosmetic only and do not negatively impact the guitar. Besides this, the guitar shows light play wear; the finish is glossy with light swirls throughout.
Serial Number: AI05202
Tech Notes: Currently set up with 10s, low action, and optimal neck relief. The guitar plays cleanly and the frets show minimal wear. The bridge is angled reverse from normal; this appears to be a factory error but does not prevent the guitar from intonating or playing properly.